Technosound Logo
<
Sign In
Monitor Speakers
Temblor T8 04

Presonus

Temblor T8

Code: 3010

200W Active Studio Subwoofer with 8" Speaker

Price: €408.00
Price: €408.00
BUY Online: €338.00
BUY Online: €338.00
You Save €70
You Save €70
including 19% VAT Excluding VAT (For shipments to Non EU countries, or intra community upon VIES Validation) price, to be calculated during checkout
Get it with Free Delivery within 24 hours, at your closest Akis Express Collection point!
Add to Cart

In Stock

years

Add Punch and Power to Your Monitoring

PreSonus aims to inject some serious low end into your studio with the Temblor T8 subwoofer. It's got a 8" reinforced-composition woofer, powered by 200 watts of Class AB power. It's easy to integrate, with filtered pass-throughs for your main speakers. A variable lowpass filter helps you fine-tune its response to your room. You'll extend the low end and overall response of your studio monitors with the PreSonus Temblor T8 Subwoofer. Engineers are constantly asked the best way to extend the range of a monitoring system. The answer is add a subwoofer. Extend the low end and overall response of your studio monitors with the PreSonus Temblor T8 Subwoofer!

    • 8-inch downward-firing glass-composite woofer for deep, accurate bass
    • Lightweight, rigid cone design for tight low-end response
    • 100W RMS / 200W Peak Class AB amplifier
    • Clean, low-distortion bass with plenty of headroom
    • Frequency response from 30 Hz to 200 Hz
    • Reproduces sub-bass frequencies that most studio monitors can't reach
    • Adjustable crossover from 50 Hz to 130 Hz
    • Built-in 80 Hz high-pass filter for cleaner performance from connected monitors
    • 0° / 180° phase switch to help align the subwoofer with your speakers
    • Input gain control from –30 dB to +6 dB for easy level matching
    • Balanced TRS inputs (2 × ¼-inch)
    • Balanced TRS outputs (2 × ¼-inch)
    • Unbalanced stereo RCA inputs
    • Unbalanced stereo RCA outputs
    • Connects between your audio interface and studio monitors in a 2.1 setup
    • Over-temperature protection
    • Output current limiting protection
    • Built-in subsonic filter
    • RF interference protection
    • Turn-on/off transient protection
    • Ground-lift switch to help eliminate hum and noise
    • Maximum SPL of 104 dB
    • Compact studio-friendly design weighing approximately 9.6 kg (21 lbs)
  • 8-inch glass-composite woofer
  • 100W RMS / 200W peak amplifier
  • Frequency response: 30 Hz – 200 Hz
  • Maximum sound pressure level (SPL): 104 dB
  • Total harmonic distortion (THD): 0.05%
  • Dimensions: 260 × 280 × 320 mm
  • Weight: 9.6 kg (21.2 lbs)