Technosound Logo
Instrument Microphones
pro35 capsule
pro35 included

PRO35

Code: 4846

Cardioid Condenser Clip-on Instrument Microphone

Price: €218.00
Price: €218.00
including 19% VAT Excluding VAT (For shipments to Non EU countries, or intra community upon VIES Validation) price, to be calculated during checkout
Add to Cart

In Stock

years

Designed for saxophone, brass and percussion, the PRO35 is ideal in applications with high sound pressure levels, and for stage performances. It comes equipped with the UniMount® clamp, which allows for precise positioning, better impact resistance, and a good protection of the capsule.

    • Ideal microphone for sax, toms, brass and percussion
    • Cardioid polar pattern improves isolation of desired sound source and reduces the pickup of sounds to the sides and rear
    • Perfect for non-static stage performances
    • Extended frequency response renders all the subtle nuances of a performance
    • 80Hz low-cut filter on the power module
    • UniMount® clip allows for precise positioning, providing impact resistance and protecting the capsule
    • Gold plated corrosion-resistant contacts on the XLRM-type connectors
    • Excels in applications with high sound pressure level
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 50 - 15,000 Hz
  • Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Switches: Flat, roll-off
  • Dynamic Range: 115 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 64 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical
  • Cable: 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories Included: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
  • Weight (microphone): 8 g
  • Weight (mains adapter): 81 g
  • Dimensions (microphone): 5.0 mm long, diameter 10.2 mm
  • Dimensions (mains adapter): 92.9 mm long, diameter 18.9 mm