Technosound Logo
Wireless Microphone Options
ATM75 4
ATM75 3
ATM75 2
ATM75 1

ATM75 CW

Code: 6750

Cardioid Condenser Headworn Microphone

Price: €126.00
Price: €126.00
BUY Online: €118.00
BUY Online: €118.00
You Save €8
You Save €8
including 19% VAT Excluding VAT (For shipments to Non EU countries, or intra community upon VIES Validation) price, to be calculated during checkout
Add to Cart

Pre-Order

Enquire to be notified upon availability

years

With a pivot-mounted flexible boom that can be positioned on either the left or right side of the head, the ATM75 headworn microphone delivers professional-quality vocal pickup with hands-free operation. Includes AT8139L large windscreen, AT8139S small windscreen, and AT8439 cable clip.


ATM75cW: 55" (1.4 m) permanently attached miniature cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack wireless transmitters.

    • Professional-quality vocal pickup with hands-free operation
    • Low-visibility headband provides stable, comfortable fit
    • Pivot-mounted flexible microphone
    • Cardioid polar pattern improves isolation of desired sound source
  • Microphones:
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 100 - 13,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave (wired only)
  • Open Circuit Sensitivity: Phantom: -51 dB (2.8 mV) re 1V at 1 Pa | Battery: -53 dB (2.2 mV) re 1V at 1 Pa.
  • Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. | Battery: 121 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: Phantom: 96 dB, 1 kHz at Max SPL | Battery: 85 dB, 1 kHz at Max SPL (wired only)
  • Signal-to-Noise Ratio: 58 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical
  • Battery Type: 1.5V AA/UM3
  • Battery Current/Life: 0.4 mA / 2000 hours typical (alkaline) (wired only)
  • Switches: Off, on-flat, on-roll-off (wired only)
  • Weight: Microphone: 60 g (2.1 oz) | Power module: 139 g (4.9 oz)
  • Cable: 4.6' (1.4 m) long (permanently attached to microphone), 0.11" (2.8 mm) diameter, 2-conductor shielded cable (termination dependent).
  • Dimensions: Microphone: 20.4 mm (0.80") diameter | Power module (wired only): 84.0 mm (3.31") H x 63.0 mm (2.48") W x 22.0 mm (0.87") D | Headset: 120.0 mm (4.72") nominal at widest point, 80.5 mm (3.17") flexible boom.
  • Output Connector: Power module: Integral 3-pin XLRM-type (wired only)
  • Accessories Included: AT8531 power module (wired only); AT8439 clothing clip; AT8139L large windscreen; AT8139S small windscreen; battery (wired only).